- elastomer foam with closed cell structure
- good heat conductor e.g. between components, heatsinks and casing parts
- electrical insulating
- can be compressed even with a low contact pressure
- absorbs shocks and vibrations
Thermal resistance at 3.2 mm material thickness:| compression [%] | contact | 10 | 25 | 50 | | contact pressure [psi] | >1 | 5 | 12 | 34 | | Rth [K/W] (1 in2 x 3.2 mm) | 6 | 4.5 | 2.5 | 1 | | heat conductivity [W/mK] | 0.3 | 0.4 | 0.45 | 0.65 |
- WSFS 635 double sided adhesive and WSF self-adhesive upon request
- according to NASA gas emission requirements
|
- elastomer foam with closed cell structure
- good heat conductor e.g. between components, heatsinks and casing parts
- electrical insulating
- can be compressed even with a low contact pressure
- absorbs shocks and vibrations
Thermal resistance at 3.2 mm material thickness:| compression [%] | contact | 10 | 25 | 50 | | contact pressure [psi] | >1 | 5 | 12 | 34 | | Rth [K/W] (1 in2 x 3.2 mm) | 6 | 4.5 | 2.5 | 1 | | heat conductivity [W/mK] | 0.3 | 0.4 | 0.45 | 0.65 |
- WSFS 635 double sided adhesive and WSF self-adhesive upon request
- according to NASA gas emission requirements
|
- thermal conductive foil based on polyester
- particularly suitable for silicone-free applications
- very good insulating properties
- one-sided adhesive layer upon request
- cuts and contours according to customer specific drawing specifications
|
- thermal conductive foil based on polyester
- particularly suitable for silicone-free applications
- very good insulating properties
- one-sided adhesive layer upon request
- cuts and contours according to customer specific drawing specifications
|
Phase Change thermal interface material- strapless (free standing film) changing condition thermal conductive material as a foil
- material with phase changing temperature at 48 °C or 52 °C
- best thermal conductivity, above the phase change temperature the material flows in all gaps of the impinged device and heatsink
- thixotropic, therefore no migration of the material away from the moistened surface
- no influence on the thermal conductivity due to thermal cycles
- only low contact pressure necessary, as it is no elastomer and therefore ideally suitable for clamp mounting of the devices
- not electrically conductive, but no insulator
- self-adhesive properties, also suitable for large surfaces
- no toxic ingredients
- customised cuts upon request
- with double-sided protective film
|
Phase Change thermal interface material- strapless (free standing film) changing condition thermal conductive material as a foil
- material with phase changing temperature at 48 °C or 52 °C
- best thermal conductivity, above the phase change temperature the material flows in all gaps of the impinged device and heatsink
- thixotropic, therefore no migration of the material away from the moistened surface
- no influence on the thermal conductivity due to thermal cycles
- only low contact pressure necessary, as it is no elastomer and therefore ideally suitable for clamp mounting of the devices
- not electrically conductive, but no insulator
- self-adhesive properties, also suitable for large surfaces
- no toxic ingredients
- customised cuts upon request
- with double-sided protective film
|
- double-side adhesive thermal conductive foil with good thermal properties
- coated carrier film with pressure-sensitive acrylate adhesive
- curing of the adhesive layer can be influenced by temperature and time
- serves as a substitute for mechanical connections
- excellent adhesive properties on aluminium and ceramics
- simple and secure attachment of e.g. heatsinks to electronic devices
- designs as electrically conductive or electrically insulating thermal conductive foil
- supplied in sheet and tape form, other forms on request
- tape width (B) available in different dimensions and lengths
- 24h sample delivery service for individual production according to customer drawing
- customised cuts and contours according to drawing specifications
|
- double-side adhesive thermal conductive foil with good thermal properties
- coated carrier film with pressure-sensitive acrylate adhesive
- curing of the adhesive layer can be influenced by temperature and time
- serves as a substitute for mechanical connections
- excellent adhesive properties on aluminium and ceramics
- simple and secure attachment of e.g. heatsinks to electronic devices
- designs as electrically conductive or electrically insulating thermal conductive foil
- supplied in sheet and tape form, other forms on request
- tape width (B) available in different dimensions and lengths
- 24h sample delivery service for individual production according to customer drawing
- customised cuts and contours according to drawing specifications
|
thermal resistance: 0.3 K/W [at 1 inch2; = 6.45 cm2; = TO 3 (AOS 3 G)]
TO 247, 23 x 20 x 1 mm, other strengths and versions on request
|
thermal resistance: 0.3 K/W [at 1 inch2; = 6.45 cm2; = TO 3 (AOS 3 G)]
TO 247, 23 x 20 x 1 mm, other strengths and versions on request
|
thermal resistance (GS 3): 0.4 K/W
TO 220, 20 x 11 mm, customer specific versions on request
|
thermal resistance (GS 3): 0.4 K/W
TO 220, 20 x 11 mm, customer specific versions on request
|
thermal resistance: 0.15 K/W [at 1 inch2; = 6.45 cm2; = TO 3 (KAP 3)]
plate (1000 x 305 mm) suitable for blanks
|
thermal resistance: 0.15 K/W [at 1 inch2; = 6.45 cm2; = TO 3 (KAP 3)]
plate (1000 x 305 mm) suitable for blanks
|
- silicone free thermal adhesive foils
- silicone free gap-filler with good thermal characteristics
- smooth, compressible and elastic
- cut outs, punchings and modifications according to customer specification
- other material thicknesses upon request
|
- silicone free thermal adhesive foils
- silicone free gap-filler with good thermal characteristics
- smooth, compressible and elastic
- cut outs, punchings and modifications according to customer specification
- other material thicknesses upon request
|
thermal resistance: 0.6 K/W
- silicone-free thermal conductive foil
- particularly suitable for silicone-free applications
- very good thermal and mechanical properties
- high electrical insulation
- cuts and contours made of sheet or roller material according to your specifications
|
thermal resistance: 0.6 K/W
- silicone-free thermal conductive foil
- particularly suitable for silicone-free applications
- very good thermal and mechanical properties
- high electrical insulation
- cuts and contours made of sheet or roller material according to your specifications
|
- soft and adaptable acrylic-based thermal conductive foil
- very good compensation of unevennesses and differences in components
- natural adhesive properties and high dielectric strength
- cuts and contours with cutouts according to customer drawings
|
- soft and adaptable acrylic-based thermal conductive foil
- very good compensation of unevennesses and differences in components
- natural adhesive properties and high dielectric strength
- cuts and contours with cutouts according to customer drawings
|
- one-side adhesive thermal conductive foil
- glass fibre reinforced design
- very good thermal conductivity
- simple handling and mounting
- cuts and contours according to customer’s drawing specifications
|
- one-side adhesive thermal conductive foil
- glass fibre reinforced design
- very good thermal conductivity
- simple handling and mounting
- cuts and contours according to customer’s drawing specifications
|
- one-sided adhesive thermal conductive foil
- additional fiberglass reinforcement
- high long-term and mechanical stability
- easy handling and mounting
- cuts and contours according to customer-specific drawing specifications
|
- one-sided adhesive thermal conductive foil
- additional fiberglass reinforcement
- high long-term and mechanical stability
- easy handling and mounting
- cuts and contours according to customer-specific drawing specifications
|
FRI 7:30 - 15:15