Phase Change thermal interface material- strapless (free standing film) changing condition thermal conductive material as a foil
- material with phase changing temperature at 48 °C or 52 °C
- best thermal conductivity, above the phase change temperature the material flows in all gaps of the impinged device and heatsink
- thixotropic, therefore no migration of the material away from the moistened surface
- no influence on the thermal conductivity due to thermal cycles
- only low contact pressure necessary, as it is no elastomer and therefore ideally suitable for clamp mounting of the devices
- not electrically conductive, but no insulator
- self-adhesive properties, also suitable for large surfaces
- no toxic ingredients
- customised cuts upon request
- with double-sided protective film
|
Phase Change thermal interface material- strapless (free standing film) changing condition thermal conductive material as a foil
- material with phase changing temperature at 48 °C or 52 °C
- best thermal conductivity, above the phase change temperature the material flows in all gaps of the impinged device and heatsink
- thixotropic, therefore no migration of the material away from the moistened surface
- no influence on the thermal conductivity due to thermal cycles
- only low contact pressure necessary, as it is no elastomer and therefore ideally suitable for clamp mounting of the devices
- not electrically conductive, but no insulator
- self-adhesive properties, also suitable for large surfaces
- no toxic ingredients
- customised cuts upon request
- with double-sided protective film
|
- double-side adhesive thermal conductive foil with good thermal properties
- coated carrier film with pressure-sensitive acrylate adhesive
- curing of the adhesive layer can be influenced by temperature and time
- serves as a substitute for mechanical connections
- excellent adhesive properties on aluminium and ceramics
- simple and secure attachment of e.g. heatsinks to electronic devices
- designs as electrically conductive or electrically insulating thermal conductive foil
- supplied in sheet and tape form, other forms on request
- tape width (B) available in different dimensions and lengths
- 24h sample delivery service for individual production according to customer drawing
- customised cuts and contours according to drawing specifications
|
- double-side adhesive thermal conductive foil with good thermal properties
- coated carrier film with pressure-sensitive acrylate adhesive
- curing of the adhesive layer can be influenced by temperature and time
- serves as a substitute for mechanical connections
- excellent adhesive properties on aluminium and ceramics
- simple and secure attachment of e.g. heatsinks to electronic devices
- designs as electrically conductive or electrically insulating thermal conductive foil
- supplied in sheet and tape form, other forms on request
- tape width (B) available in different dimensions and lengths
- 24h sample delivery service for individual production according to customer drawing
- customised cuts and contours according to drawing specifications
|
thermal resistance: 0.6 K/W
- silicone-free thermal conductive foil
- particularly suitable for silicone-free applications
- very good thermal and mechanical properties
- high electrical insulation
- cuts and contours made of sheet or roller material according to your specifications
|
thermal resistance: 0.6 K/W
- silicone-free thermal conductive foil
- particularly suitable for silicone-free applications
- very good thermal and mechanical properties
- high electrical insulation
- cuts and contours made of sheet or roller material according to your specifications
|
- soft and adaptable acrylic-based thermal conductive foil
- very good compensation of unevennesses and differences in components
- natural adhesive properties and high dielectric strength
- cuts and contours with cutouts according to customer drawings
|
- soft and adaptable acrylic-based thermal conductive foil
- very good compensation of unevennesses and differences in components
- natural adhesive properties and high dielectric strength
- cuts and contours with cutouts according to customer drawings
|
- one-side adhesive thermal conductive foil
- glass fibre reinforced design
- very good thermal conductivity
- simple handling and mounting
- cuts and contours according to customer’s drawing specifications
|
- one-side adhesive thermal conductive foil
- glass fibre reinforced design
- very good thermal conductivity
- simple handling and mounting
- cuts and contours according to customer’s drawing specifications
|
- one-sided adhesive thermal conductive foil
- additional fiberglass reinforcement
- high long-term and mechanical stability
- easy handling and mounting
- cuts and contours according to customer-specific drawing specifications
|
- one-sided adhesive thermal conductive foil
- additional fiberglass reinforcement
- high long-term and mechanical stability
- easy handling and mounting
- cuts and contours according to customer-specific drawing specifications
|
|
suitable for blanks
|
suitable for blanks
|
- highly thermally conductive silicone foil
- soft, elastic and compressible
- design with hardened surface on one side for better handling
- optimum compensation of air gaps and unevennesses
- customised contour parts according to drawing specifications
|
- highly thermally conductive silicone foil
- soft, elastic and compressible
- design with hardened surface on one side for better handling
- optimum compensation of air gaps and unevennesses
- customised contour parts according to drawing specifications
|
Phase Change thermal interface material
- phase change material on a polyimide basis
- very good thermal properties
- one-sided adhesive layer eases the mounting
- particularly suitable for the application of spring clips
- cuts and contours upon customised drawing specifications
|
Phase Change thermal interface material
- phase change material on a polyimide basis
- very good thermal properties
- one-sided adhesive layer eases the mounting
- particularly suitable for the application of spring clips
- cuts and contours upon customised drawing specifications
|
thermal resistance: 0.2 K/W
- polyurethane-based thermal conductive foil
- very good mechanical properties
- excellent insulation properties
- adhesive coating for easy handling
- cut to size and contours according to customised drawing specifications
|
thermal resistance: 0.2 K/W
- polyurethane-based thermal conductive foil
- very good mechanical properties
- excellent insulation properties
- adhesive coating for easy handling
- cut to size and contours according to customised drawing specifications
|
thermal resistance: 0.165 K/W
- thermal conductive foil for silicone-free applications
- epoxy-based thermal conductive foil
- excellent insulation properties
- cuts and contours according to customised drawing specifications
|
thermal resistance: 0.165 K/W
- thermal conductive foil for silicone-free applications
- epoxy-based thermal conductive foil
- excellent insulation properties
- cuts and contours according to customised drawing specifications
|
- double-sided adhesive thermal conductive foil
- excellent adhesive properties on different materials
- filling material with ceramic particles
- very good thermal conductivity and technical performance
- cuts and contours according to customer’s drawing specifications
|
- double-sided adhesive thermal conductive foil
- excellent adhesive properties on different materials
- filling material with ceramic particles
- very good thermal conductivity and technical performance
- cuts and contours according to customer’s drawing specifications
|
FRI 7:30 - 15:15