contents of delivery: 1 = 1 x basic profile 2 = 2 x plastic exterior frame 3 = 2 x cover panel (2 mm) 4 = 2 x plastic pressed on frame (similar RAL 7012) 5 = 4 x plastic design strip 6 = mounting material - multi-purpose tube case made of aluminium with integrated guide slots for mounting non-standard PCBs or devices
- unique, elegant design with shock-proof plastic covers and integrated sealing
- horizontal or vertical mounting possibility of the PCB with 1.6 or 2 mm thickness
- protection class IP67 achievable without using additional sealings
- integration possibility of front foils or key pads
- special designs and treatments, modifications and versions possible according to your demand
- outer frames and design strips in sky blue (similar to RAL 5015), brick red (similar to RAL 3002), bright green (similar to RAL 6038), pure orange (similar to RAL 2004) or sulphur yellow (similar to RAL 1016)
- other colours and surfaces upon request
|
contents of delivery: 1 = 1 x basic profile 2 = 2 x plastic exterior frame 3 = 2 x cover panel (2 mm) 4 = 2 x plastic pressed on frame (similar RAL 7012) 5 = 4 x plastic design strip 6 = mounting material - multi-purpose tube case made of aluminium with integrated guide slots for mounting non-standard PCBs or devices
- unique, elegant design with shock-proof plastic covers and integrated sealing
- horizontal or vertical mounting possibility of the PCB with 1.6 or 2 mm thickness
- protection class IP67 achievable without using additional sealings
- integration possibility of front foils or key pads
- special designs and treatments, modifications and versions possible according to your demand
- outer frames and design strips in sky blue (similar to RAL 5015), brick red (similar to RAL 3002), bright green (similar to RAL 6038), pure orange (similar to RAL 2004) or sulphur yellow (similar to RAL 1016)
- other colours and surfaces upon request
|
- universal, massive aluminium clamp mounting for all 35mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
- universal, massive aluminium clamp mounting for all 35mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
- universal, massive aluminium clamp mounting for all 35mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
- universal, massive aluminium clamp mounting for all 35mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
- universal, massive aluminium clamp mounting for all 35 mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
- universal, massive aluminium clamp mounting for all 35 mm mounting rails
- suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
- fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
- safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
- special lengths (≥40mm), machinings and surfaces upon request
- * = examples of mounting rail versions suitable for KL 35
|
EMC seals: KO ..., ET, RL, TUG
|
EMC seals: KO ..., ET, RL, TUG
|
round cords
|
round cords
|
EMC - IP seals
|
EMC - IP seals
|
EMC seals, TUS
|
EMC seals, TUS
|
way of fixation:
- fixing of mounting rail
- with fixing straps
Shell cases for Raspberry Pi
contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)- solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
- easy to install thanks to an easy screwing
- ventilation slots in the upper and lower part for an improved heat transport
- available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
- optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
- optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
- special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
|
way of fixation:
- fixing of mounting rail
- with fixing straps
Shell cases for Raspberry Pi
contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)- solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
- easy to install thanks to an easy screwing
- ventilation slots in the upper and lower part for an improved heat transport
- available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
- optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
- optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
- special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
|
- completely made of aluminium
- material thickness 1.5 mm on all sides
- shell panels lacquered black (RAL 9005), cover panels natural colour anodised
- special dimensions, treatments and surfaces on request
- supplied as a demounted kit including cover panels and mounting material
|
- completely made of aluminium
- material thickness 1.5 mm on all sides
- shell panels lacquered black (RAL 9005), cover panels natural colour anodised
- special dimensions, treatments and surfaces on request
- supplied as a demounted kit including cover panels and mounting material
|
FRI 7:30 - 15:15