The leading manufacturer of heatsinks, thermal conductive materials, cases and connectors.
Service hotline
MON-THR 7:30 - 15:45
FRI 7:30 - 15:15
E-mail service

Miniature aluminium casing

Miniature aluminium casing for D-Sub

akg553250sa.jpg
akg553280me.jpg
akg55_32.eps
akg105_ld.tif

Miniature aluminium casing

AKG 55 32 ...

AKG 55 32 50 SA

  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
Price on application
Quantity
Features
surface:
black anodised
fixing strap (optional):
for cover panels
length:
50 mm
Variants
1 - 10 (12)Number:
akg553250sa.jpg
AKG 55 32 50 SA
  • surface: black anodised
  • length: 50 mm
 
akg553250me.jpg
  • surface: natural colour anodised
  • length: 50 mm
 
akg553280sa.jpg
  • surface: black anodised
  • length: 80 mm
 
akg553280me.jpg
  • surface: natural colour anodised
  • length: 80 mm
 
akg5532100sa.jpg
  • surface: black anodised
  • length: 100 mm
 
akg5532100me.jpg
  • surface: natural colour anodised
  • length: 100 mm
 
akg553280me.jpg
  • surface: black anodised
  • fixing strap: for cover panels
  • length: 50 mm
 
akg553280me.jpg
  • surface: natural colour anodised
  • fixing strap: for cover panels
  • length: 50 mm
 
akg553280me.jpg
  • surface: black anodised
  • fixing strap: for cover panels
  • length: 80 mm
 
akg553280me.jpg
  • surface: natural colour anodised
  • fixing strap: for cover panels
  • length: 80 mm
 
1 - 10 (12)Number:
Technical Drawing
height:
32 mm
width:
55 mm
D:
51 mm
Accessories / similar products
Accessory Product families:
1 - 10 (26)Number:
akg55l.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg55l.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg55l.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_.tif
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg_105_.tif

contents of delivery:
1 = 2 x case profile; 2 = 2 x cover panel (2 mm); 3 = mounting material

  • aluminium case made of half-shells which are slotted into each other for insertion of 100 mm eurocards
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • optimized thermal management by means of integrated cooling fin geometry
  • further dimensions, machinings and surfaces upon request
 
1 - 10 (26)Number:
Product family accessory of product family:
akg331680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg332480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg411680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg412080me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg412480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg551680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg552080me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg552480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg552880me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
akg331680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
 
Profile in meter lengths:
gb80web.eps
 
Data sheet

Cookies