The leading manufacturer of heatsinks, thermal conductive materials, cases and connectors.
Service hotline
MON-THR 7:30 - 15:45
FRI 7:30 - 15:15
E-mail service

Shell-, extruded assembled cases, desk consoles and Euro cases

1 - 12 (82)Number:
rsp1web.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
rsp2_blau.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
rsp3rot.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
rsp1hexpl.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
rsp2h_silber.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
rsp3h_blau.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
sg_.tif
  • completely made of aluminium
  • material thickness 1.5 mm on all sides
  • shell panels lacquered black (RAL 9005), cover panels natural colour anodised
  • special dimensions, treatments and surfaces on request
  • supplied as a demounted kit including cover panels and mounting material
sgv.jpg
  • height: 20 - 150 mm
  • width: 50 - 250 mm
  • length: 50 - 300 mm
  • D: 30 - 238 mm
contents of delivery:
1 = upper shell; 2 = lower shell; 3 = 4 x M3 – threaded bush for PCB mounting; 4 = mounting material
sgv_p_ml_l.jpg
  • height: 70 - 200 mm
  • width: 100 - 500 mm
  • length: 120 - 400 mm
  • D: 76 - 476 mm
Shell cases variable, desk version
contents of delivery:
1 = upper shell; 2 = lower shell; 3 = 4 x M3 – threaded bush for PCB mounting; 4 = mounting material

  • universal shell case with variable dimensions
  • easy and fast mounting
  • insertion of non-standardised PCBs and devices
  • material thickness of the half shells 2 mm, other material thicknesses on request
  • special treatments, surfaces and labelings acc. to customer specifications
sgp_.tif
  • flexible shell case for different dimensions
  • side panel profile with integrated guide slots in 5.08 mm grid spacing (1 HP)
  • for insertion of non-standard components or printed circuit boards
  • cover panels and side panel profiles natural colour anodised, half shells black anodised
  • special dimensions, drillings and surface treatments upon request
  • supplied as a demounted kit, including cover panels and mounting material
sgp_.tif
  • flexible shell case for different dimensions
  • side panel profile with integrated guide slots in 5.08 mm grid spacing (1 HP)
  • for insertion of non-standard components or printed circuit boards
  • cover panels and side panel profiles natural colour anodised, half shells black anodised
  • special dimensions, drillings and surface treatments upon request
  • supplied as a demounted kit, including cover panels and mounting material
sgp_.tif
  • flexible shell case for different dimensions
  • side panel profile with integrated guide slots in 5.08 mm grid spacing (1 HP)
  • for insertion of non-standard components or printed circuit boards
  • cover panels and side panel profiles natural colour anodised, half shells black anodised
  • special dimensions, drillings and surface treatments upon request
  • supplied as a demounted kit, including cover panels and mounting material
1 - 12 (82)Number:
* This information refers to the standard variant of the product, so it might change when another variant is chosen.

Cookies