The leading manufacturer of heatsinks, thermal conductive materials, cases and connectors.
Service hotline
MON-THR 7:30 - 15:45
FRI 7:30 - 15:15
E-mail service

Miniature aluminium casing

1 - 12 (69)Number:
akg331680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg331680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg332480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg411680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg412080me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg412480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg551680me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg552080me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg552480me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg552880me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg553280me.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
akg55l.jpg
  • casing tubes made of aluminium sections which are slotted into each other and screwed together
  • the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
  • the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
    with a thickness of 1.8 mm, lateral in the profile until 1.6 mm 
  • designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
  • while using the corresponding case D-Sub connectors can be mounted without front panel
  • supplied as demounted kit incl. 2 mm cover plates and mounting material
  • cutouts, special lengths and surface treatments upon request
1 - 12 (69)Number:

Cookies