round cords
|
round cords
|
Desing case EUROTAINER
contents of delivery: 1 = 1 x case upper shell; 2 = 1 x case lower shell; 3 = 2 x cover panels; 4 = side profile 5 = 4 x plastic frame (RAL 5014 pigeon blue); 6 = 16 x small standing feet (RAL 4002red violet); 8= mounting material - multi-purpose aluminium case for 100 mm Eurocards with integrated guide slots with a modular spacing of 5,08 mm (1 HP)
- horizontal and vertical connection possibility (stackable) due to a robust plastic frame
- EMC compatible design achieved by electrical conductive surface treatment and additional conductive seals
- insertion possibility for front foils or key pads
- protection class IP54 achieved by use of seals
- cover panels can be perforated or imprinted to your specifications, further surface treatments upon request
- other surfaces upon request
|
Desing case EUROTAINER
contents of delivery: 1 = 1 x case upper shell; 2 = 1 x case lower shell; 3 = 2 x cover panels; 4 = side profile 5 = 4 x plastic frame (RAL 5014 pigeon blue); 6 = 16 x small standing feet (RAL 4002red violet); 8= mounting material - multi-purpose aluminium case for 100 mm Eurocards with integrated guide slots with a modular spacing of 5,08 mm (1 HP)
- horizontal and vertical connection possibility (stackable) due to a robust plastic frame
- EMC compatible design achieved by electrical conductive surface treatment and additional conductive seals
- insertion possibility for front foils or key pads
- protection class IP54 achieved by use of seals
- cover panels can be perforated or imprinted to your specifications, further surface treatments upon request
- other surfaces upon request
|
EMC seals: KO ..., ET, RL, TUG
|
EMC seals: KO ..., ET, RL, TUG
|
contents of delivery: 1 = upper shell; 2 = lower shell; 3 = 4 x M3 – threaded bush for PCB mounting; 4 = mounting material
|
contents of delivery: 1 = upper shell; 2 = lower shell; 3 = 4 x M3 – threaded bush for PCB mounting; 4 = mounting material
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
HF-shielded insert module with integral card guide, with T-grooves for threaded strips or M 2.5 □ nuts
|
HF-shielded insert module with integral card guide, with T-grooves for threaded strips or M 2.5 □ nuts
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
- completely made of aluminium
- material thickness 1.5 mm on all sides
- shell panels lacquered black (RAL 9005), cover panels natural colour anodised
- special dimensions, treatments and surfaces on request
- supplied as a demounted kit including cover panels and mounting material
|
- completely made of aluminium
- material thickness 1.5 mm on all sides
- shell panels lacquered black (RAL 9005), cover panels natural colour anodised
- special dimensions, treatments and surfaces on request
- supplied as a demounted kit including cover panels and mounting material
|
FRI 7:30 - 15:15